|
|
|
Viking HDS 1500 Drysuit |
 |
Trelleborg Viking
-- Product quality and performance have made Trelleborg Protective
Products one of the world’s leading producers of protective
clothing and products. They develop and manufacture chemical
protective suits, dry diving suits (under the Viking drysuits brand
name), inflatable shelters and a wide range of industrial products.
Safety has always been the most important issue at Trelleborg
Protective Products when designing and producing the Viking diving
drysuits. Functionality is the most important aspect of safety. A
diving drysuit that works the way it should, is perhaps the best safety
assurance the professional diver can get. |
|
 |
Viking
Dry Suit Owners Manual
Viking HDS sets the new
standard among vulcanized rubber dry suits. HDS suits are made of
NITECS, a new and US patent pending rubber material developed by the
Trelleborg Group. NITECS provides unsurpassed protection against
chemical permeation along with extreme durability against wear and tear.
The suit is fitted with rotating inlet and exhaust valves and a
heavy-duty zip, equipped with integrated reinforcements from the foot up
over the knee. Configuration options for Viking HDS 1500 include all Viking
yokes, Magnum HDS hood, NITECS sleeve rings, various pockets and relief
zip.
NITECS – EXTREMELY DURABLE GARMENT
MATERIAL (US PATENT PENDING)
NITECS is developed with the sole purpose of providing never before
seen protection against chemical permeation along with extreme
durability against abrasion damages. Demanding diving applications and
diving in heavily contaminated and polluted waters have never been
safer. NITECS offers not only a higher protection index against
aggressive chemicals and contaminants like petroleum, diesel and
aviation fuels but is doing so while keeping the material weight very
low. Viking HDS suits are all made of 1050 g/m² NITECS material. For HDS 1500
this means a lighter and more comfortable commercial diving suit while
at the same time offering more protection and durability than ever.
The Viking HDS 1500 has an extra layer of NITECS reinforcement rubber
with anti-slip surface vulcanized to the suit. This protects the suit
from abrasion damage in certain areas, e.g. over the boots, front of
lower legs and knees, around the zipper and over the shoulders.
Complete permeation results according to
chemical protection requirements of EN 14225-2 available for download.
|
Warning!
Diving in contaminated water is extremely hazardous and requires special
training. The diving supervisor has the full responsibility for the safety
of the diver based on a risk assessment of the actual conditions at the dive
site. When possible, diving in contaminated water should be avoided.
|
|
Viking HDS 1500 Features (shown with optional helmet yoke):
-
Vulcanized
rubber dry suit made of NITECS - new and extremely durable rubber
material from Trelleborg Protective Products (US pat. pend.)
-
Complete
suit including all rubber components (boot soles, valve plate,
cuff rings) are made of NITECS material
-
Black
material (1050 g/m2)
-
High
protection index against petroleum based chemicals and extremely
good chemical permeation data in general
-
NITECS
material offers 4x the abrasion resistance of Viking
HD
1500
-
Follows the patterns and sizes of Viking
HD 1500 -
available in 8 standard sizes; 01-04 and 01Wide-04Wide
-
Fitted
with Viking Hazmat
inlet valve (360° swiveling) and Viking X2
outlet valve as standard
-
Gas
and watertight heavy-duty chloroprene zipper across the shoulders
-
Black
integrated NITECS reinforcements from the foot over the knee to
the seat, across shoulders and down on arms and in crotch area
-
NITECS
reinforced boots
-
Integrated
suspenders for ease of wear
-
NITECS accessories include all Viking yokes, Magnum HDS hood and
NITECS sleeve rings
-
Certified according to EN 14225-2, including the optional
chemical protection requirements
-
Viking
suit bag,
hose, and repair kit included
|
|
Many helmet yoke options (for Aquadyne, Desco,
Draeger, Miller, and Superlite helmets),
undergarments,
valves, and
accessories are available for
Viking drysuits. Please contact
us for a Viking suit equipped to your specifications.
|
|
If
you require a relief zipper, see instructions at the bottom of this
page.
|
| Viking
hood options:
|
Combi
(w/Lockring) |
Turbo |
Magnum |
| Outer
Shell |
Latex |
Rubber |
Rubber |
| Face Seal |
Latex |
Latex |
Latex |
| Inner Hood |
Liner
(included) |
Latex |
Liner
(included) |
| Neck Seal |
Latex |
- |
Latex |
|
|
Viking
HDS 1500 Drysuit Sizing Chart
|
|
Note:
Viking HDS suits are made to order (not stocked by Viking).
Please allow approx. 3-4 weeks lead time.
|
|
|
|
Add a HD Relief
Zipper
to your Viking HDS 1500 drysuit. |
Instructions for adding
relief zipper:
-
Select
the suit you require and click "add to cart"
-
Click
"continue shopping" to return to this page
-
Click
"add to cart" for the relief zipper option
Price
(Installed): $269.00
 |
|
|
| While
these are excellent reference materials, in no way should this information
be considered a replacement for proper training for the specific type of
diving in which you plan to participate. |